Types Of Gold Bar

If you are in eagerness about types of gold, here an article from goldbarsworldwide.com. Gold bars are classified into two types, dependent on their method of manufacture : cast and minted.

A gold bar is broadly defined as a cast or minted gold item, regardless of shape, which is made by a recognized bar manufacturer. It is normally issued at a low premium above the prevailing value of its fine gold content.The markings on bars are mainly functional, recording where required the name of the manufacturer or issuer, the bar’s weight and gold purity, and a serial number.
However, it can be noted that the characteristics of bars manufactured
worldwide can vary with many widely traded bars having their own
distinctive features. For example:
• London Good Delivery “400 oz” bars have variable weights and
purities, and the weight is not normally recorded on the bar.
• The minimum or specified gold purity of bars, accepted as “good
delivery” by leading associations and exchanges, can range from 99%
to 99.99%.
• Most minted bars manufactured worldwide include a design or motif on the reverse side as a standard feature.
• While most cast bars record a serial number, like gold coins most small minted bars manufactured worldwide do not.
• Many cast bars have few or no markings, and variable weights and
purities, when produced mainly for jewellery, industrial and other
It can also be observed that the bulk of bars manufactured worldwide is absorbed by jewellery, industrial and other fabricators, and that all cast and minted bars have the capacity to be used by both fabricators and investors, when issued or available at a low premium above the
prevailing value of their fine gold content.

Cast bars are normally produced directly from gold that has been melted.
However, the way in which melted gold is used in their manufacture can vary. The traditional method is to cast (i.e. pour) gold, which has been melted in a crucible, into a mould with appropriate dimensions.
Cast bars manufactured by Argor-Heraeus (Switzerland).
A modern method, now widely used to manufacture a smaller cast bar, is to melt, in a furnace, a measured weight of gold granules or cut pieces of gold that have been placed in a mould with appropriate dimensions.
Another modern method, used to create a cast bar that is long and flat,
notably for the manufacture of minted bars, is to pass melted gold
through a die, which has a specified width and thickness and has been
clamped between cooling blocks, in a continuous casting process.
Markings, if required, are usually applied manually or by a press.
When manufactured in an open mould, most cast bars are “inclined”
(i.e. tapered) in shape to facilitate their removal from the mould.
Consequently, the dimensions (length and width) of the top and base
surface areas are not normally the same. While the top surface is usually smooth, the base surface and sides tend to be relatively rough.
Although cast bars are normally rectangular (broad or narrow, flat or
inclined), some refiners also manufacture them in other shapes (e.g. rod, round, square).

Minted bars are normally cut from a cast bar that has been rolled to a
uniform thickness. The cutting is usually done with a die to create blanks that have the required dimensions and weight.
All the surfaces (top, base and sides) are smooth and even. Markings are normally applied by a minting press.
Although most minted bars are rectangular, they are also manufactured in a variety of other shapes (e.g. round, square, oval).
Minted “pendant” bars, which incorporate a hook or hanger so they can be worn, are also manufactured.
Terminology: minted bars are also referred to as ingots, and in some
countries as wafers, minted products or “coins”, when the shape is round.

The following are broad definitions and classifications that are used by
The Industry Collection of Gold Bars Worldwide.

Unwrought bars
The Industry Collection classifies low purity cast gold bars (i.e. newlymined doré bars and bars made from melted down scrap), and refined cast gold bars used for fabrication or investment purposes, as unwrought bars.
It also classifies minted gold bars as unwrought bars for fabrication or investment purposes, when they are manufactured by a recognized bar manufacturer, include official markings, and are known to have been issued at a low premium above the prevailing value of their fine goldcontent.However, it can be noted that, while some countries classify minted gold bars as “unwrought”, others classify them under some other category, notably as “other semi-manufactured forms” or as “other articles of precious metal”.

Investment bars
The Industry Collection also classifies a cast or minted bar as an
investment bar, when known to have been issued by a recognized bar manufacturer or issuer at a low premium above the prevailing value of its fine gold content.

Ornamental bars
Within the Industry Collection, this classification applies to gold bars that are issued at a fixed price or at a high premium above the value of their fine gold content. This would include the limited edition of proof “Fine Art” bars from Singapore, and “model bars” from South Korea.

Note on pendant bars
The Industry Collection normally classifies minted pendant gold bars, i.e. those that incorporate a hook or hanger so they can also be worn, as investment bars. This classification is applied when the bars are issued by a recognized bar manufacturer or issuer, include the same official markings as standard minted bars, and are issued at a low premium above the prevailing value of their fine gold content.


September 16, 2010 - Posted by | Learn Gold

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: